+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6012 ZZ · 60 × 95 × 18

Deep groove ball · 6012 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6012 ZZ: ⌀60 × ⌀95 × 18 mm6012 ZZZZ
    Fig. 1: 6012 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6012 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6012 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    5 exact, 26 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    95 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    30.7 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    23.2 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.42 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 60 × 95 × 18 from other brands

    31 products
    Series illustration (not a photo of this item): 6012 ZZ
    You are viewingNTE 6012 ZZ

    Everything the number specifies matches: series 60, 60 × 95 × 18 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 6012 ZZ6012 ZZThis bearingNTE60 × 95 × 18available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6012 ZZ6012 ZZCT60 × 95 × 1896 pcs€2.98
    • Photo: 6012 ZZ6012 ZZZ&S60 × 95 × 18available to order€6.79
    • Photo: 6012-2Z6012-2ZSKF60 × 95 × 18available to order€16.48
    • Photo: 6012 ZZ6012 ZZSKF60 × 95 × 18available to order€26.17
    02

    Often bought with this

    shaft snap ring Ø60, bore snap ring Ø95, seal 60×95

    4 products
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø95CT-RING SEG 95 W by 100Why it fits: DIN 472 snap ring for a 95 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 60×95JULU 060-95-10 TCWhy it fits: Oil seal 60×95: shaft 60 and housing bore 95, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.71385 pcs
    • Seal 60×95NQK 60x95x10Why it fits: Oil seal 60×95: shaft 60 and housing bore 95, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €1.98out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 95d 60B 18
    d×D×Bsize 60 × 95 × 18mm
    Cdynamic 30.7kN
    C0static 23.2kN
    mweight 0.42kg

    Deep groove ball bearing 6012-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80112.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80112?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0112 corresponds to the ISO base 6012. Size 60 × 95 × 18 mm, a full equivalent of 6012-ZZ.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet