+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6004 2RSC3 · 20 × 42 × 12

Deep groove ball · 6004 2RSC3

radial — mediumaxial — low, on both sides
    Drawing of 6004 2RSC3: ⌀20 × ⌀42 × 12 mm6004 2RSC32RS
    Fig. 1: 6004 2RSC3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6004 2RSC3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6004 2RSC3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    6 exact, 57 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    42 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    12 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    C3
    C
    9.95 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.069 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 20 × 42 × 12 from other brands

    64 products
    Series illustration (not a photo of this item): 6004 2RSC3
    You are viewingNTE 6004 2RSC3

    Everything the number specifies matches: series 60, 20 × 42 × 12 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 6004 2RSC36004 2RSC3This bearingNTE20 × 42 × 12available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6004 2RSC36004 2RSC3CT20 × 42 × 12100 pcs€0.47
    • Series illustration (not a photo of this item): 6004 2RS C36004 2RS C3Koyo20 × 42 × 1285 pcs€3.29
    • Series illustration (not a photo of this item): 6004-2RSH/C36004-2RSH/C3SKF20 × 42 × 12available to order€3.33
    • Photo: 6004 2RS C36004 2RS C3TIMKEN20 × 42 × 12available to order€6.16
    • Series illustration (not a photo of this item): 6004 2NSE C36004 2NSE C3NACHI20 × 42 × 12available to orderon request
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø42, seal 20×42

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø42CT SEG 42 W by 1000Why it fits: DIN 472 snap ring for a 42 bore: holds the outer ring in the housing
      €45.155 pcs
    • Seal 20×42JULU 020-42-7 TCWhy it fits: Oil seal 20×42: shaft 20 and housing bore 42, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.25300 pcs
    • Seal 20×42JULU 020-42-10 TCWhy it fits: Oil seal 20×42: shaft 20 and housing bore 42, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.28560 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Gaspardo Nina 250/​300/​400 (mechanical seed drill) Maschio Gaspardo same geometry 3 assemblies

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: maschio_nina-2015

    2. Gaspardo Primavera (pneumatic seed drill) Maschio Gaspardo same geometry 3 assemblies

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: maschio_primavera-2009

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 42d 20B 12
    d×D×Bsize 20 × 42 × 12mm
    Cdynamic 9.95kN
    C0static 5kN
    mweight 0.069kg

    Deep groove ball bearing 6004-2RS C3, design 2RS: contact seals on both sides.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet