+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €5.27 per piece.
32307 A · 35 × 80 × 32.75

Tapered roller · 32307 A

at an angle — high, on one side
    Drawing of 32307 A: ⌀35 × ⌀80 × 32.75 mm⌀80⌀35B 31T 32.75C 25α32307 A
    Fig. 1: 32307 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32307 A

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing NTE 32307 A

    €6.38per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 7 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    31 mm
    Width BRing width. Source: supplier data
    T
    32.75 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: two supplier sources
    Cup width C
    25 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    C
    93.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    114 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.8 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 35 × 80 × 32.75 from other brands

    12 products
    Series illustration (not a photo of this item): 32307 A
    You are viewingNTE 32307 A
    €6.38baseline for the price comparison

    Everything the number specifies matches: series 323, 35 × 80 × 31 mm, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 32307 A32307 AThis bearingNTE35 × 80 × 31available to order€6.38you are here
    • Photo: 32307 A32307 AZ&S35 × 80 × 31available to order€7.43+€1.05

    Under the price: the difference from the price of this bearing (€6.38).
    02

    Often bought with this

    seal 35×80, shaft snap ring Ø35, bore snap ring Ø80

    6 products
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      €0.53250 pcs
    • Seal 35×80035-80-10Why it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    7 machines1 makeby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has A; GOST → ISO pair 7607→32307 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has A; GOST → ISO pair 7607→32307 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    3. Belarus 1523/​1523V/​1523.3 Belarus check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has A; GOST → ISO pair 7607→32307 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    4. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has A; GOST → ISO pair 7607→32307 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    5. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has A; GOST → ISO pair 7607→32307 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 35 × 80 × 32.75mm
    Cdynamic 93.5kN
    C0static 114kN
    mweight 0.8kg

    Tapered roller bearing 32307.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet