+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22338 MBW33 · 190 × 400 × 132

Spherical roller · 22338 MBW33

radial — highaxial — medium, on both sides
    Drawing of 22338 MBW33: ⌀190 × ⌀400 × 132 mm⌀400⌀19013222338 MBW33
    Fig. 1: 22338 MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22338 MBW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22338 MBW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 3 approximate
    d
    190 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    400 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    132 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 190 × 400 × 132 from other brands

    6 products
    Series illustration (not a photo of this item): 22338 MBW33
    You are viewingNTE 22338 MBW33

    Everything the number specifies matches: series 223, 190 × 400 × 132 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 22338 MBW3322338 MBW33This bearingNTE190 × 400 × 132available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22338MBW3322338MBW33CT190 × 400 × 132available to order€408.94
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 190 × 400 × 132mm

    Spherical roller bearing 22338. Under GOST the same bearing is designated 3638.

    Frequently asked questions

    What is 3638?

    It is the same bearing under GOST 3189-89: 3638 corresponds to the ISO base 22338. Size 190 × 400 × 132 mm, a full equivalent of 22338.

    Will 22338 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet