+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22315 CCKW33 · 75 × 160 × 55

Spherical roller · 22315 CCKW33

radial — highaxial — medium, on both sides
    Drawing of 22315 CCKW33: ⌀75 × ⌀160 × 55 mm⌀160⌀755522315 CCKW33
    Fig. 1: 22315 CCKW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22315 CCKW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22315 CCKW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 26 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    55 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 75 × 160 × 55 from other brands

    29 products
    Series illustration (not a photo of this item): 22315 CCKW33
    You are viewingNTE 22315 CCKW33

    Everything the number specifies matches: series 223, 75 × 160 × 55 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 22315 CCKW3322315 CCKW33This bearingNTE75 × 160 × 55available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22315CCKW3322315CCKW33DYZV75 × 160 × 55available to orderon request
    02

    Often bought with this

    adapter sleeve H2315, lock nut M75×2, lock washer MB15

    6 products
    • Adapter sleeve H2315CT H 2315Why it fits: H2315 for 22315 K: 1:12 taper, bore 75 for shaft 65 (Koyo, p. 156)
      €6.0996 pcs
    • Adapter sleeve H2315Koyo H 2315Why it fits: H2315 for 22315 K: 1:12 taper, bore 75 for shaft 65 (Koyo, p. 156)
      Price to be confirmedavailable to order
    • Lock nut M75×2CT KM 15 SILVERWhy it fits: KM15 is the nut for sleeve H2315: thread M75×2
      €2.11128 pcs
    • Lock nut M75×2FAG KM 15Why it fits: KM15 is the nut for sleeve H2315: thread M75×2
      Price to be confirmedavailable to order
    • Lock washer MB15CT MB 15Why it fits: MB15 locks the KM15 nut (ISO 2982-2)
      €0.31345 pcs
    • Lock washer MB15MB 15Why it fits: MB15 locks the KM15 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 1 assembly · 1 pcs per machine

      ours has CC, K, W33; not decoded: mark “N” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (153615) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 75 × 160 × 55mm

    Spherical roller bearing 22315 K. Under GOST the same bearing is designated 153615.

    Frequently asked questions

    What is 153615?

    It is the same bearing under GOST 3189-89: 153615 corresponds to the ISO base 22315 K. Size 75 × 160 × 55 mm, a full equivalent of 22315 K.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet