+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22313 CW33 · 65 × 140 × 48

Spherical roller · 22313 CW33

radial — highaxial — medium, on both sides
    Drawing of 22313 CW33: ⌀65 × ⌀140 × 48 mm⌀140⌀654822313 CW33
    Fig. 1: 22313 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22313 CW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22313 CW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 21 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    48 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    340 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    360 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    3.75 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 65 × 140 × 48 from other brands

    25 products
    Series illustration (not a photo of this item): 22313 CW33
    You are viewingNTE 22313 CW33

    Everything the number specifies matches: series 223, 65 × 140 × 48 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 22313 CW3322313 CW33This bearingNTE65 × 140 × 48available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22313 CW3322313 CW33CT65 × 140 × 48available to orderon request
    • Series illustration (not a photo of this item): 22313 CW3322313 CW33KG65 × 140 × 48available to orderon request
    02

    Often bought with this

    shaft snap ring Ø65

    2 products
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 65 × 140 × 48mm
    Cdynamic 340kN
    C0static 360kN
    mweight 3.75kg

    Spherical roller bearing 22313.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 22313 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet