+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22312 CCKW33 · 60 × 130 × 46

Spherical roller · 22312 CCKW33

radial — highaxial — medium, on both sides
    Drawing of 22312 CCKW33: ⌀60 × ⌀130 × 46 mm⌀130⌀604622312 CCKW33
    Fig. 1: 22312 CCKW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22312 CCKW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22312 CCKW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 29 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    46 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 60 × 130 × 46 from other brands

    31 products
    Series illustration (not a photo of this item): 22312 CCKW33
    You are viewingNTE 22312 CCKW33

    Everything the number specifies matches: series 223, 60 × 130 × 46 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 22312 CCKW3322312 CCKW33This bearingNTE60 × 130 × 46available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22312 KW3322312 KW33NTE60 × 130 × 46available to orderon request
    02

    Often bought with this

    adapter sleeve H2312, lock nut M60×2, lock washer MB12

    6 products
    • Adapter sleeve H2312CT H 2312 with black KMWhy it fits: H2312 for 22312 K: 1:12 taper, bore 60 for shaft 55 (Koyo, p. 156)
      €2.87available to order
    • Adapter sleeve H2312FAG H2312Why it fits: H2312 for 22312 K: 1:12 taper, bore 60 for shaft 55 (Koyo, p. 156)
      €34.05available to order
    • Lock nut M60×2CT KM 12 SILVERWhy it fits: KM12 is the nut for sleeve H2312: thread M60×2
      €1.31410 pcs
    • Lock nut M60×2Z&S KM 12Why it fits: KM12 is the nut for sleeve H2312: thread M60×2
      €1.96available to order
    • Lock washer MB12CT MB 12Why it fits: MB12 locks the KM12 nut (ISO 2982-2)
      €0.22202 pcs
    • Lock washer MB12MB 12Why it fits: MB12 locks the KM12 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 130 × 46mm

    Spherical roller bearing 22312 K. Under GOST the same bearing is designated 153612.

    Frequently asked questions

    What is 153612?

    It is the same bearing under GOST 3189-89: 153612 corresponds to the ISO base 22312 K. Size 60 × 130 × 46 mm, a full equivalent of 22312 K.

    Will 22312 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet