+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €13.25 per piece.
22309 CW33 · 45 × 100 × 36

Spherical roller · 22309 CW33

radial — highaxial — medium, on both sides
    Drawing of 22309 CW33: ⌀45 × ⌀100 × 36 mm⌀100⌀453622309 CW33
    Fig. 1: 22309 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22309 CW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22309 CW33

    €16.03per piece incl. VAT
    In stock: 9 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    5 exact, 12 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    36 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    183 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    183 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.4 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 100 × 36 from other brands

    19 products
    Series illustration (not a photo of this item): 22309 CW33
    You are viewingNTE 22309 CW33
    €16.03baseline for the price comparison

    Everything the number specifies matches: series 223, 45 × 100 × 36 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 22309 CW3322309 CW33This bearingNTE45 × 100 × 369 pcs€16.03you are here
    • Series illustration (not a photo of this item): 22309 CW3322309 CW33CT45 × 100 × 36532 pcs€7.90−€8.13
    • Series illustration (not a photo of this item): 22309 CW3322309 CW33AKE45 × 100 × 36available to orderon request
    • Series illustration (not a photo of this item): 22309 CW3322309 CW33KG45 × 100 × 36available to orderon request
    • Series illustration (not a photo of this item): 22309 CW3322309 CW33URB45 × 100 × 36available to orderon request

    Under the price: the difference from the price of this bearing (€16.03).
    02

    Often bought with this

    seal 45×100, shaft snap ring Ø45, bore snap ring Ø100

    3 products
    • Seal 45×100JULU 045-100-10 TCWhy it fits: Oil seal 45×100: shaft 45 and housing bore 100, the same as the bearing
      €0.93available to order
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 45 × 100 × 36mm
    Cdynamic 183kN
    C0static 183kN
    mweight 1.4kg

    Spherical roller bearing 22309. Under GOST the same bearing is designated 3609.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 3609?

    It is the same bearing under GOST 3189-89: 3609 corresponds to the ISO base 22309. Size 45 × 100 × 36 mm, a full equivalent of 22309.

    Will 22309 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet