+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22218 MBKW33 · 90 × 160 × 40

Spherical roller · 22218 MBKW33

radial — highaxial — medium, on both sides
    Drawing of 22218 MBKW33: ⌀90 × ⌀160 × 40 mm⌀160⌀904022218 MBKW33
    Fig. 1: 22218 MBKW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22218 MBKW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22218 MBKW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 35 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    40 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    325 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 90 × 160 × 40 from other brands

    41 products
    Series illustration (not a photo of this item): 22218 MBKW33
    You are viewingNTE 22218 MBKW33

    Everything the number specifies matches: series 222, 90 × 160 × 40 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 22218 MBKW3322218 MBKW33This bearingNTE90 × 160 × 40available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22218 KMBW3322218 KMBW33CT90 × 160 × 40available to orderon request
    02

    Often bought with this

    adapter sleeve H318, lock nut M90×2, lock washer MB18

    6 products
    • Adapter sleeve H318SKF H 318Why it fits: H318 for 22218 K: 1:12 taper, bore 90 for shaft 80 (Koyo, p. 156)
      €50.6685 pcs
    • Adapter sleeve H318CT H 318Why it fits: H318 for 22218 K: 1:12 taper, bore 90 for shaft 80 (Koyo, p. 156)
      €6.38available to order
    • Lock nut M90×2CT KM 18 blackWhy it fits: KM18 is the nut for sleeve H318: thread M90×2
      €3.80available to order
    • Lock nut M90×2KM 18Why it fits: KM18 is the nut for sleeve H318: thread M90×2
      Price to be confirmedavailable to order
    • Lock washer MB18CT MB 18Why it fits: MB18 locks the KM18 nut (ISO 2982-2)
      €0.58240 pcs
    • Lock washer MB18FAG MB 18Why it fits: MB18 locks the KM18 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 90 × 160 × 40mm
    Cdynamic 325kN

    Spherical roller bearing 22218 K. Under GOST the same bearing is designated 153518.

    C: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 153518?

    It is the same bearing under GOST 3189-89: 153518 corresponds to the ISO base 22218 K. Size 90 × 160 × 40 mm, a full equivalent of 22218 K.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet