+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22217 CW33 · 85 × 150 × 36

Spherical roller · 22217 CW33

radial — highaxial — medium, on both sides
    Drawing of 22217 CW33: ⌀85 × ⌀150 × 36 mm⌀150⌀853622217 CW33
    Fig. 1: 22217 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22217 CW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22217 CW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 23 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    36 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    285 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    325 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    2.6 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 85 × 150 × 36 from other brands

    26 products
    Series illustration (not a photo of this item): 22217 CW33
    You are viewingNTE 22217 CW33

    Everything the number specifies matches: series 222, 85 × 150 × 36 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 22217 CW3322217 CW33This bearingNTE85 × 150 × 36available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22217 CW3322217 CW33KG85 × 150 × 36available to orderon request
    02

    Often bought with this

    bore snap ring Ø150

    1 product
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 85 × 150 × 36mm
    Cdynamic 285kN
    C0static 325kN
    mweight 2.6kg

    Spherical roller bearing 22217.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 22217 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet