+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €19.53 per piece.
22216 CW33 · 80 × 140 × 33

Spherical roller · 22216 CW33

radial — highaxial — medium, on both sides
    Drawing of 22216 CW33: ⌀80 × ⌀140 × 33 mm⌀140⌀803322216 CW33
    Fig. 1: 22216 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22216 CW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22216 CW33

    €23.63per piece incl. VAT
    In stock: 10 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    4 exact, 25 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    33 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    236 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    270 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    2.05 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 80 × 140 × 33 from other brands

    30 products
    Series illustration (not a photo of this item): 22216 CW33
    You are viewingNTE 22216 CW33
    €23.63baseline for the price comparison

    Everything the number specifies matches: series 222, 80 × 140 × 33 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 22216 CW3322216 CW33This bearingNTE80 × 140 × 3310 pcs€23.63you are here
    • Series illustration (not a photo of this item): 22216 C/W3322216 C/W33CT80 × 140 × 33available to order€12.34−€11.29
    • Series illustration (not a photo of this item): 22216 CW3322216 CW33KG80 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): 22216 CW3322216 CW33MTM80 × 140 × 33available to orderon request

    Under the price: the difference from the price of this bearing (€23.63).
    02

    Often bought with this

    seal 80×140

    1 product
    • Seal 80×140JULU 080-140-13 TCWhy it fits: Oil seal 80×140: shaft 80 and housing bore 140, the same as the bearing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 140 × 33mm
    Cdynamic 236kN
    C0static 270kN
    mweight 2.05kg

    Spherical roller bearing 22216. Under GOST the same bearing is designated 53516.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 53516?

    It is the same bearing under GOST 3189-89: 53516 corresponds to the ISO base 22216. Size 80 × 140 × 33 mm, a full equivalent of 22216.

    Will 22216 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet