+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €16.02 per piece.
22214 CAW33 · 70 × 125 × 31

Spherical roller · 22214 CAW33

radial — highaxial — medium, on both sides
    Drawing of 22214 CAW33: ⌀70 × ⌀125 × 31 mm⌀125⌀703122214 CAW33
    Fig. 1: 22214 CAW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22214 CAW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22214 CAW33

    €19.38per piece incl. VAT
    In stock: 10 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 14 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    31 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 70 × 125 × 31 from other brands

    16 products
    Series illustration (not a photo of this item): 22214 CAW33
    You are viewingNTE 22214 CAW33
    €19.38baseline for the price comparison

    Everything the number specifies matches: series 222, 70 × 125 × 31 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 22214 CAW3322214 CAW33This bearingNTE70 × 125 × 3110 pcs€19.38you are here
    • Series illustration (not a photo of this item): 22214 CA/W3322214 CA/W33CT70 × 125 × 3111 pcs€11.06−€8.32

    Under the price: the difference from the price of this bearing (€19.38).
    02

    Often bought with this

    seal 70×125, shaft snap ring Ø70, bore snap ring Ø125

    3 products
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing
      €0.8782 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    4 machines1 makeby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 2 assemblies · 2 pcs per machine

      ours has CA, W33; not decoded: mark “N” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 1523/​1523V/​1523.3 Belarus check the version 2 assemblies · 2 pcs per machine

      ours has CA, W33; not decoded: mark “N” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    3. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus check the version 1 assembly · 1 pcs per machine

      ours has CA, W33; not decoded: mark “N” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    4. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus check the version 1 assembly · 1 pcs per machine

      ours has CA, W33; not decoded: mark “N” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 70 × 125 × 31mm

    Spherical roller bearing 22214.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet