+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
180606 · 30 × 72 × 19

Deep groove ball · 180606 (62306 2RS) PQ · simplified: bore (cylindrical or K), not given in the designation

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 180606 (62306 2RS) PQ: ⌀30 × ⌀72 × 19 mm⌀72⌀3019180606 (62306 2RS) PQ2RS
    Fig. 1: 180606 (62306 2RS) PQ, simplified drawing per ISO 8826-1; GOST number = ISO 62306 2RS, dimensions from the GOST↔ISO table CX p.766. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 180606

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 180606

    Supplier’s set and note: (62306 2RS) PQ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 4 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    19 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    01

    Equivalents

    the same size 30 × 72 × 19 from other brands

    10 products
    Cross-section drawing to size: Deep groove ball, 30 × 72 × 19 mm
    You are viewingNTE 180606

    Same size, different design: the difference is written in the row.

    • Photo: 62306-2RS1/C362306-2RS1/C3different designSKF30 × 72 × 27available to order€29.66
    • Cross-section drawing to size: Deep groove ball, 30 × 72 × 27 mm4306 2RSdifferent series: 4306no brand30 × 72 × 27available to orderon request
    • Type diagram, no dimensions: bearing4306 ATN9A: not decodedSKF30 × 72 × ?available to orderon request
    • Type diagram, no dimensions: bearing4306-B-TVopen, no protectionNKE30 × 72 × ?available to orderon request
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø72, seal 30×72

    6 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 30×72JULU 030-72-10 TCWhy it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.392,205 pcs
    • Seal 30×72SOG 100958N 30x72x10Why it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 72d 30B 19
    d×D×Bsize 30 × 72 × 19mm

    Deep groove ball bearing 180606 (62306 2RS) PQ, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet