+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1160305 · 25 × 62 × 21

Deep groove ball · 1160305

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 1160305: ⌀25 × ⌀62 × 21 mm⌀62⌀25211160305RS
    Fig. 1: 1160305, simplified drawing per ISO 8826-1; GOST number, dimensions from the GOST↔ISO table CX p.761. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1160305

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 1160305

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    3 exact, 3 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    21 mm
    Width BRing width. Source: supplier data
    Seal
    contact seal on one side
    Clearance
    normal clearance
    01

    Equivalents

    the same size 25 × 62 × 21 from other brands

    8 products
    Cross-section drawing to size: Deep groove ball, 25 × 62 × 21 mm
    You are viewingNTE 1160305

    Everything the number specifies matches: series 11603, 25 × 62 × 21 mm, contact seal on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Cross-section drawing to size: Deep groove ball, 25 × 62 × 21 mm1160305This bearingNTE25 × 62 × 21available to orderon requestyou are here
    • Cross-section drawing to size: Deep groove ball, 25 × 62 × 21 mm1160305CT25 × 62 × 211 pcs€0.76
    • Cross-section drawing to size: Deep groove ball, 25 × 62 × 21 mm1160305KG25 × 62 × 21available to orderon request
    02

    Often bought with this

    shaft snap ring Ø25, bore snap ring Ø62, seal 25×62

    5 products
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 25×62JULU 025-62-10 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing; the bearing has its own seals (on both sides), and the oil seal closes the unit from outside
      €0.39890 pcs
    • Seal 25×62JULU 025-62-7 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing; the bearing has its own seals (on both sides), and the oil seal closes the unit from outside
      €0.39available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 62d 25B 21
    d×D×Bsize 25 × 62 × 21mm

    Deep groove ball bearing 1160305, design : contact seal on one side.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet