+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ209ET *5 · 45 × 85 × 19

Cylindrical roller · NJ209ET *5

radial — highaxial — low, on one side
    Drawing of NJ209ET *5: ⌀45 × ⌀85 × 19 mm⌀85⌀4519NJ209ET *5
    Fig. 1: NJ209ET *5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ209ET *5

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing NSK NJ209ET *5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 27 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    85 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    19 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 45 × 85 × 19 from other brands

    34 products
    Series illustration (not a photo of this item): NJ209ET *5
    You are viewingNSK NJ209ET *5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): N209J PQN209J PQJ, PQ: not decodedNTE45 × 85 × 198 pcs€8.06
    • Series illustration (not a photo of this item): NJ209J PQNJ209J PQJ, PQ: not decodedNTE45 × 85 × 1918 pcs€8.06
    • Series illustration (not a photo of this item): NU209J PQNU209J PQJ, PQ: not decodedNTE45 × 85 × 1914 pcs€8.06
    • Photo: NUP 209 ENUP 209 EENEU45 × 85 × 19available to order€9.95
    • Photo: NUP 209 MANUP 209 MAMANEU45 × 85 × 19available to order€10.15
    • Photo: NUP 209 ENUP 209 EEZ&S45 × 85 × 19available to order€11.24
    • Photo: NUP 209 EN C3NUP 209 EN C3clearance C3, E, groove for a snap ringZ&S45 × 85 × 19available to order€12.27
    • Photo: N 209 EN 209 EETMB45 × 85 × 19available to order€12.78
    • Photo: NU 209NU 209different designURB45 × 85 × 19available to order€21.91
    • Series illustration (not a photo of this item): N 209 EN 209 EECT45 × 85 × 19available to orderon request
    02

    Often bought with this

    seal 45×85, shaft snap ring Ø45, bore snap ring Ø85

    4 products
    • Seal 45×85JULU 045-85-10 TCWhy it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing
      €0.62690 pcs
    • Seal 45×85SOG Oil seal 45x85x10Why it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø85CT SEG 85 W by 100Why it fits: DIN 472 snap ring for a 85 bore: holds the outer ring in the housing
      €22.57out of stock
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus check the version 1 assembly · 4 pcs per machine

      ours has E, T, 5; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 45 × 85 × 19mm

    Cylindrical roller NJ bearing NJ209ET *5.

    Frequently asked questions

    Will 209 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet