+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
HR32217J 5 · 85 × 150 × 38.5

Tapered roller · HR32217J 5

at an angle — high, on one side
    Drawing of HR32217J 5: ⌀85 × ⌀150 × 38.5 mm⌀150⌀85B 36T 38.5C 30αHR32217J 5
    Fig. 1: HR32217J 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of HR32217J 5

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing NSK HR32217J 5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 6 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    36 mm
    Width BRing width. Source: supplier data
    T
    38.5 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    30 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 85 × 150 × 38.5 from other brands

    9 products
    Cross-section drawing to size: Tapered roller, 85 × 150 × T 38.5 mm
    You are viewingNSK HR32217J 5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 3221732217standard designNTE85 × 150 × 3628 pcs€18.62
    • Series illustration (not a photo of this item): 3221732217standard designCT85 × 150 × 36available to order€9.93
    • Photo: 32217 A32217 AAZ&S85 × 150 × 36available to order€25.40
    • Photo: 32217 A32217 AASKF85 × 150 × 36available to order€93.94
    • Series illustration (not a photo of this item): 3221732217standard designKG85 × 150 × 36available to orderon request
    • Series illustration (not a photo of this item): 3221732217standard designTIMKEN85 × 150 × 36available to orderon request
    02

    Often bought with this

    bore snap ring Ø150

    1 product
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    8 machines2 makesby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 1 assembly · 2 pcs per machine

      ours has J, 5

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. KhTZ-16131, KhTZ-16331 KhTZ check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has J, 5; GOST → ISO pair 7517→32217 only CX is not checked against a second source

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    3. KhTZ-17021, KhTZ-17221 KhTZ check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has J, 5; GOST → ISO pair 7517→32217 only CX is not checked against a second source

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    4. KhTZ-242K.20 KhTZ check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has J, 5; GOST → ISO pair 7517→32217 only CX is not checked against a second source

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    5. KhTZ-243K.20 KhTZ check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has J, 5; GOST → ISO pair 7517→32217 only CX is not checked against a second source

      manufacturer’s catalogue: Tractor KhTZ-243K.20. Operator’s manual

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 85 × 150 × 38.5mm

    Tapered roller bearing HR32217J 5.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet