+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
HR30212J 5 · 60 × 110 × 23.75

Tapered roller · HR30212J 5

at an angle — high, on one side
    Drawing of HR30212J 5: ⌀60 × ⌀110 × 23.75 mm⌀110⌀60B 22T 23.75C 19αHR30212J 5
    Fig. 1: HR30212J 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of HR30212J 5

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing NSK HR30212J 5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 7 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    22 mm
    Width BRing width. Source: supplier data
    T
    23.75 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    19 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 60 × 110 × 23.75 from other brands

    11 products
    Cross-section drawing to size: Tapered roller, 60 × 110 × T 23.75 mm
    You are viewingNSK HR30212J 5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 3021230212standard designNTE60 × 110 × 22448 pcs€6.70
    • Series illustration (not a photo of this item): 3021230212standard designCT60 × 110 × 22available to order€4.85
    • Photo: 30212 A30212 AAZ&S60 × 110 × 22available to order€7.51
    • Photo: 3021230212standard designTIMKEN60 × 110 × 22available to order€41.48
    • Series illustration (not a photo of this item): 3021230212standard designKG60 × 110 × 22available to orderon request
    • Series illustration (not a photo of this item): 30212 A30212 AANTE60 × 110 × 22available to orderon request
    • Series illustration (not a photo of this item): 3021230212standard designSKF60 × 110 × 22available to orderon request
    02

    Often bought with this

    seal 60×110, shaft snap ring Ø60, bore snap ring Ø110

    4 products
    • Seal 60×110JULU 060-110-12 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      €1.05480 pcs
    • Seal 60×110JULU 060-110-10 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    6 machines1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus check the version 2 assemblies · 6 pcs per machine

      the machine has A; ours does not; ours is P0; the machine takes P6; ours has J, 5; GOST → ISO pair 7212→30212 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus check the version 2 assemblies · 6 pcs per machine

      the machine has A; ours does not; ours is P0; the machine takes P6; ours has J, 5; GOST → ISO pair 7212→30212 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has J, 5; GOST → ISO pair 7212→30212 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    4. Belarus 1523/​1523V/​1523.3 Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has J, 5; GOST → ISO pair 7212→30212 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    5. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has J, 5; GOST → ISO pair 7212→30212 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 60 × 110 × 23.75mm

    Tapered roller bearing HR30212J 5.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet