+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
HR30204J 5 · 20 × 47 × 15.25

Tapered roller · HR30204J 5

at an angle — high, on one side
    Drawing of HR30204J 5: ⌀20 × ⌀47 × 15.25 mm⌀47⌀20B 14T 15.25C 12αHR30204J 5
    Fig. 1: HR30204J 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of HR30204J 5

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing NSK HR30204J 5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 8 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    14 mm
    Width BRing width. Source: supplier data
    T
    15.25 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    12 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 20 × 47 × 15.25 from other brands

    14 products
    Cross-section drawing to size: Tapered roller, 20 × 47 × T 15.25 mm
    You are viewingNSK HR30204J 5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 3020430204standard designCT20 × 47 × 14359 pcs€1.13
    • Series illustration (not a photo of this item): 3020430204standard designNTE20 × 47 × 14185 pcs€1.52
    • Photo: 3020430204standard designCX20 × 47 × 14available to order€3.91
    • Series illustration (not a photo of this item): 3020430204standard designno brand20 × 47 × 14available to orderon request
    • Series illustration (not a photo of this item): 3020430204standard designKG20 × 47 × 14available to orderon request
    • Series illustration (not a photo of this item): 3020430204standard designKYK20 × 47 × 14available to orderon request
    • Series illustration (not a photo of this item): 3020430204standard designTIMKEN20 × 47 × 14available to orderon request
    • Photo: 30204 A30204 AAZ&S20 × 47 × 14available to orderon request
    02

    Often bought with this

    seal 20×47, shaft snap ring Ø20, bore snap ring Ø47

    5 products
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing
      €0.293,920 pcs
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 2 pcs per machine

      ours has J, 5; GOST → ISO pair 7204→30204 only CX is not checked against a second source; the type of our item by number does not match its section: please check

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 20 × 47 × 15.25mm

    Tapered roller bearing HR30204J 5.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet