+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6917 ZZ · 85 × 120 × 18

Deep groove ball · 6917 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6917 ZZ: ⌀85 × ⌀120 × 18 mm6917 ZZZZ
    Fig. 1: 6917 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6917 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6917 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 4 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 85 × 120 × 18 from other brands

    6 products
    Series illustration (not a photo of this item): 6917 ZZ
    You are viewingNSK 6917 ZZ

    Everything the number specifies matches: series 69, 85 × 120 × 18 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NSK catalogue.

    • Series illustration (not a photo of this item): 6917 ZZ6917 ZZThis bearingNSK85 × 120 × 18available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6917-ZZ6917-ZZNTN85 × 120 × 18available to orderon request
    02

    Often bought with this

    bore snap ring Ø120, seal 85×120

    3 products
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    • Seal 85×120JULU 085-120-12 TCWhy it fits: Oil seal 85×120: shaft 85 and housing bore 120, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.97216 pcs
    • Seal 85×120JULU 085-120-13 TCWhy it fits: Oil seal 85×120: shaft 85 and housing bore 120, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €1.09available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 120d 85B 18
    d×D×Bsize 85 × 120 × 18mm

    Deep groove ball bearing 6917-ZZ, design ZZ: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 6917 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet