+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6819DD AS2S5 · 95 × 120 × 13

Deep groove ball · 6819DD AS2S5

radial — mediumaxial — low, on both sides
    Drawing of 6819DD AS2S5: ⌀95 × ⌀120 × 13 mm6819DD AS2S5DD
    Fig. 1: 6819DD AS2S5, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6819DD AS2S5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6819DD AS2S5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 2 approximate
    d
    95 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    13 mm
    Width BRing width. Source: supplier data
    Seal
    DDcontact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 95 × 120 × 13 from other brands

    4 products
    Drawing: 6819DD AS2S5
    You are viewingNSK 6819DD AS2S5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 61819 ZZ61819 ZZmetal shields on both sides, standard designCT95 × 120 × 13available to orderon request
    • Type diagram, no dimensions: ball61819 Y/C3clearance C3, Y: not decodedINA95 × 120 × ?available to orderon request
    02

    Often bought with this

    bore snap ring Ø120, seal 95×120

    3 products
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    • Seal 95×120JULU 095-120-12 TCWhy it fits: Oil seal 95×120: shaft 95 and housing bore 120, the same as the bearing; the bearing has its own seals (DD), and the oil seal closes the unit from outside
      €1.271,250 pcs
    • Seal 95×120JULU 095-120-13 TCWhy it fits: Oil seal 95×120: shaft 95 and housing bore 120, the same as the bearing; the bearing has its own seals (DD), and the oil seal closes the unit from outside
      €1.15available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 120d 95B 13
    d×D×Bsize 95 × 120 × 13mm

    Deep groove ball bearing 6819-2RS, design DD: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 6819 DD C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet