+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6310DDUCM D EEMS5 · 50 × 110 × 27

Deep groove ball · 6310DDUCM D EEMS5

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6310DDUCM D EEMS5: ⌀50 × ⌀110 × 27 mm⌀110⌀50276310DDUCM D EEMS5D
    Fig. 1: 6310DDUCM D EEMS5, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6310DDUCM D EEMS5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6310DDUCM D EEMS5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 62 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    27 mm
    Width BRing width. Source: supplier data
    Seal
    Dcontact seal on one side
    Clearance
    CM
    01

    Equivalents

    the same size 50 × 110 × 27 from other brands

    63 products
    Cross-section drawing to size: Deep groove ball, 50 × 110 × 27 mm
    You are viewingNSK 6310DDUCM D EEMS5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6310 C36310 C3open, no protection, clearance C3, standard designCT50 × 110 × 2750 pcs€3.73
    • Series illustration (not a photo of this item): 63106310open, no protection, normal clearance, standard designCT50 × 110 × 2774 pcs€5.41
    • Series illustration (not a photo of this item): 6310 C36310 C3open, no protection, clearance C3, standard designNTE50 × 110 × 2738 pcs€5.95
    • Series illustration (not a photo of this item): 6310 N6310 Nopen, no protection, normal clearance, groove for a snap ringCT50 × 110 × 27available to order€4.38
    • Photo: 63106310open, no protection, normal clearance, standard designNEU50 × 110 × 27available to order€9.04
    • Photo: 6310 C36310 C3open, no protection, clearance C3, standard designZ&S50 × 110 × 27available to order€10.64
    • Photo: 63106310open, no protection, normal clearance, standard designIKL50 × 110 × 27available to order€16.76
    • Photo: 6310/C36310/C3open, no protection, clearance C3, standard designSKF50 × 110 × 27available to order€22.24
    • Photo: 63106310open, no protection, normal clearance, standard designSKF50 × 110 × 27available to order€22.42
    • Series illustration (not a photo of this item): 6310 NR6310 NRopen, no protection, normal clearance, groove and snap ringCT50 × 110 × 27available to orderon request
    02

    Often bought with this

    shaft snap ring Ø50, bore snap ring Ø110, seal 50×110

    4 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    • Seal 50×110JULU 050-110-10 TCWhy it fits: Oil seal 50×110: shaft 50 and housing bore 110, the same as the bearing; the bearing has its own seals (D), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    11 machines2 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours has clearance CM; the machine takes normal (CN); ours has EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus check the version 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours has clearance CM; the machine takes normal (CN); ours has EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has clearance CM; the machine takes normal (CN); ours has EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    4. Belarus 1523/​1523V/​1523.3 Belarus check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has clearance CM; the machine takes normal (CN); ours has EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    5. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has clearance CM; the machine takes normal (CN); ours has EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 110d 50B 27
    d×D×Bsize 50 × 110 × 27mm

    Deep groove ball bearing 6310-RS, design D: contact seal on one side.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet