+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6209DDUK NS7S5 · 45 × 85 × 19

Deep groove ball · 6209DDUK NS7S5

radial — mediumaxial — low, on both sides
    Drawing of 6209DDUK NS7S5: ⌀45 × ⌀85 × 19 mm6209DDUK NS7S5DDU
    Fig. 1: 6209DDUK NS7S5, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6209DDUK NS7S5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6209DDUK NS7S5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 56 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    85 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    19 mm
    Width BRing width. Source: supplier data
    Seal
    DDUcontact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 45 × 85 × 19 from other brands

    59 products
    Drawing: 6209DDUK NS7S5
    You are viewingNSK 6209DDUK NS7S5

    Everything the number specifies matches: series 62, 45 × 85 × 19 mm, contact seals on both sides, K, normal clearance, special design. The codes in the number are read against the NSK catalogue.

    • Drawing: 6209DDUK NS7S56209DDUK NS7S5This bearingNSK45 × 85 × 19available to orderon requestyou are here
    • Photo: 6209 2RS K6209 2RS KFKL45 × 85 × 19out of stockon request
    • Series illustration (not a photo of this item): 6209K.2RSR6209K.2RSRSLF45 × 85 × 19available to orderon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    14 machines2 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 3 assemblies · 6 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has K, NS7S, 5

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 3 assemblies · 6 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has K, NS7S, 5

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 3 assemblies · 5 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has K, NS7S, 5

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    4. Maschio Bisonte (compactor) Maschio Gaspardo same geometry 3 assemblies

      ours has K, NS7S, 5

      manufacturer’s catalogue: maschio_bisonte-2016

    5. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 2 assemblies · 4 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has K, NS7S, 5

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 85d 45B 19
    d×D×Bsize 45 × 85 × 19mm

    Deep groove ball bearing 6209 K-2RS, design DDU: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet