+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6208DDUNR* D EEMS5 · 40 × 80 × 18

Deep groove ball · 6208DDUNR* D EEMS5

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6208DDUNR* D EEMS5: ⌀40 × ⌀80 × 18 mm⌀80⌀40186208DDUNR* D EEMS5D
    Fig. 1: 6208DDUNR* D EEMS5, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6208DDUNR* D EEMS5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6208DDUNR* D EEMS5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 86 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    Dcontact seal on one side
    Clearance
    normal clearance
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    87 products
    Cross-section drawing to size: Deep groove ball, 40 × 80 × 18 mm
    You are viewingNSK 6208DDUNR* D EEMS5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6208 2RS6208 2RScontact seals on both sides, standard designCT40 × 80 × 18176 pcs€1.67
    • Series illustration (not a photo of this item): 6208 2RS C36208 2RS C3contact seals on both sides, clearance C3, standard designNTE40 × 80 × 18480 pcs€2.69
    • Series illustration (not a photo of this item): 6208 2RS6208 2RScontact seals on both sides, standard designNTE40 × 80 × 181,692 pcs€2.80
    • Cross-section drawing to size: Deep groove ball, 40 × 80 × 18 mmK 6208 2RScontact seals on both sides, K: not decodedCT40 × 80 × 18294 pcs€2.94
    • Drawing: SS 6208 2RSSS 6208 2RScontact seals on both sides, stainless steelCT40 × 80 × 1849 pcs€8.13
    • Series illustration (not a photo of this item): 6208 2NSE6208 2NSEcontact seals on both sides, standard designNACHI40 × 80 × 1835 pcs€8.19
    • Series illustration (not a photo of this item): 6208 2HRS6208 2HRScontact seals on both sides, standard designFAG40 × 80 × 1898 pcs€8.60
    • Series illustration (not a photo of this item): 6208 2RSR C36208 2RSR C3contact seals on both sides, clearance C3, standard designFAG40 × 80 × 18190 pcs€9.17
    • Series illustration (not a photo of this item): 6208 2RS C36208 2RS C3contact seals on both sides, clearance C3, standard designKoyo40 × 80 × 1885 pcs€9.69
    • Series illustration (not a photo of this item): 6208 2RSCM6208 2RSCMcontact seals on both sides, clearance CM, standard designKoyo40 × 80 × 1850 pcs€10.91
    02

    Often bought with this

    shaft snap ring Ø40, bore snap ring Ø80, seal 40×80

    6 products
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 40×80JULU 040-80-7 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing; the bearing has its own seals (D), and the oil seal closes the unit from outside
      €0.53770 pcs
    • Seal 40×80JULU 040-80-10 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing; the bearing has its own seals (D), and the oil seal closes the unit from outside
      €0.54463 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    24 machines4 makesby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus check the version 6 assemblies · 7 pcs per machine

      the machine has A; ours does not; ours has groove and snap ring (NR), EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Maschio/​Gaspardo DC Rapido (harrow drill) Maschio Gaspardo check the version 5 assemblies

      ours has groove and snap ring (NR), EEMS, 5; not decoded: mark “BOMB.18” in the machine catalogue, suffix of our number “DDUD”

      manufacturer’s catalogue: maschio_dc---dc-rapido

    3. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus check the version 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; ours has groove and snap ring (NR), EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Maschio Cobra SC Maschio Gaspardo check the version 4 assemblies

      ours has groove and snap ring (NR), EEMS, 5; not decoded: mark “BOMB.18” in the machine catalogue, suffix of our number “DDUD”

      manufacturer’s catalogue: maschio_cobra-sc

    5. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 3 assemblies · 4 pcs per machine

      ours has groove and snap ring (NR), EEMS, 5; not decoded: suffix of our number “DDUD”; not set by the number: sealing

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (160208) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 40B 18
    d×D×Bsize 40 × 80 × 18mm

    Deep groove ball bearing 6208-RS, design D: contact seal on one side. Under GOST the same bearing is designated 160208.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 160208?

    It is the same bearing under GOST 3189-89: 16 — contact seal on one side, 0208 corresponds to the ISO base 6208. Size 40 × 80 × 18 mm, a full equivalent of 6208-RS.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet