+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
606 ZZMC3E · 6 × 17 × 6

Deep groove ball · 606 ZZMC3E

radial — mediumaxial — low, on both sides
    Drawing of 606 ZZMC3E: ⌀6 × ⌀17 × 6 mm606 ZZMC3EZZ
    Fig. 1: 606 ZZMC3E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 606 ZZMC3E

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 606 ZZMC3E

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    d
    6 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    17 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    6 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    MC3
    01

    Often bought with this

    shaft snap ring Ø6, bore snap ring Ø17

    2 products
    • Shaft snap ring Ø6CT SEG 6 Z by1000Why it fits: DIN 471 snap ring for a 6 shaft: holds the inner ring on the shaft
      €5.51out of stock
    • Bore snap ring Ø17CT SEG 17 W by 1000Why it fits: DIN 472 snap ring for a 17 bore: holds the outer ring in the housing
      €10.30out of stock
    02

    Details

    what this bearing is, questions

    About the bearing

    D 17d 6B 6
    d×D×Bsize 6 × 17 × 6mm

    Deep groove ball bearing 606-ZZ, design ZZ: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet