+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6010DDUCM D EEMS5 · 50 × 80 × 16

Deep groove ball · 6010DDUCM D EEMS5

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6010DDUCM D EEMS5: ⌀50 × ⌀80 × 16 mm⌀80⌀50166010DDUCM D EEMS5D
    Fig. 1: 6010DDUCM D EEMS5, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6010DDUCM D EEMS5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6010DDUCM D EEMS5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 32 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    Dcontact seal on one side
    Clearance
    CM
    01

    Equivalents

    the same size 50 × 80 × 16 from other brands

    35 products
    Cross-section drawing to size: Deep groove ball, 50 × 80 × 16 mm
    You are viewingNSK 6010DDUCM D EEMS5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, normal clearance, standard designCT50 × 80 × 161,754 pcs€1.98
    • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, normal clearance, standard designNTE50 × 80 × 1659 pcs€2.58
    • Drawing: SS 6010 2RSSS 6010 2RScontact seals on both sides, normal clearance, stainless steelCT50 × 80 × 16280 pcs€7.72
    • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, normal clearance, standard designKoyo50 × 80 × 1623 pcs€10.88
    • Photo: 6010 2RS6010 2RScontact seals on both sides, normal clearance, standard designZ&S50 × 80 × 16available to order€4.21
    • Photo: 6010-2RS16010-2RS1contact seals on both sides, normal clearance, standard designSKF50 × 80 × 16available to order€12.71
    • Photo: 6010-2RS1/C36010-2RS1/C3contact seals on both sides, clearance C3, standard designSKF50 × 80 × 16available to order€12.71
    • Photo: 6010 2RS6010 2RScontact seals on both sides, normal clearance, standard designTIMKEN50 × 80 × 16available to order€16.76
    • Photo: 6010 2RS6010 2RScontact seals on both sides, normal clearance, standard designNEU50 × 80 × 16available to order€20.32
    • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, normal clearance, standard designno brand50 × 80 × 16available to orderon request
    02

    Often bought with this

    shaft snap ring Ø50, bore snap ring Ø80, seal 50×80

    6 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 50×80JULU 050-80-10 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing; the bearing has its own seals (D), and the oil seal closes the unit from outside
      €0.541,000 pcs
    • Seal 50×80JULU 050-80-8 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing; the bearing has its own seals (D), and the oil seal closes the unit from outside
      €0.54700 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    3 machines2 makesby parts catalogues

    1. Belarus-152 Belarus check the version 3 assemblies · 5 pcs per machine

      ours has clearance CM; the machine takes normal (CN); ours has EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    2. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 1 assembly · 2 pcs per machine

      ours has clearance CM; the machine takes normal (CN); ours has EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 2 pcs per machine

      ours has clearance CM; the machine takes normal (CN); ours has EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by GOST (160110) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 50B 16
    d×D×Bsize 50 × 80 × 16mm

    Deep groove ball bearing 6010-RS, design D: contact seal on one side. Under GOST the same bearing is designated 160110.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 160110?

    It is the same bearing under GOST 3189-89: 16 — contact seal on one side, 0110 corresponds to the ISO base 6010. Size 50 × 80 × 16 mm, a full equivalent of 6010-RS.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet