+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6009DDUC3E D EEMS5 · 45 × 75 × 16

Deep groove ball · 6009DDUC3E D EEMS5

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6009DDUC3E D EEMS5: ⌀45 × ⌀75 × 16 mm⌀75⌀45166009DDUC3E D EEMS5D
    Fig. 1: 6009DDUC3E D EEMS5, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6009DDUC3E D EEMS5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6009DDUC3E D EEMS5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 47 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    75 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    Dcontact seal on one side
    Clearance
    C3
    01

    Equivalents

    the same size 45 × 75 × 16 from other brands

    48 products
    Cross-section drawing to size: Deep groove ball, 45 × 75 × 16 mm
    You are viewingNSK 6009DDUC3E D EEMS5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6009 2RS6009 2RScontact seals on both sides, normal clearance, standard designCT45 × 75 × 162,878 pcs€1.59
    • Series illustration (not a photo of this item): 6009 2RS6009 2RScontact seals on both sides, normal clearance, standard designNTE45 × 75 × 1680 pcs€2.46
    • Drawing: SS 6009 2RSSS 6009 2RScontact seals on both sides, normal clearance, stainless steelCT45 × 75 × 16200 pcs€6.67
    • Photo: 6009 2RSR C36009 2RSR C3contact seals on both sides, standard designFAG45 × 75 × 16270 pcs€8.30
    • Series illustration (not a photo of this item): 6009 2RS6009 2RScontact seals on both sides, normal clearance, standard designKoyo45 × 75 × 1650 pcs€9.37
    • Series illustration (not a photo of this item): 6009 2RS P6 BBC-R6009 2RS P6 BBC-Rcontact seals on both sides, normal clearance, precision class P6, standard designBBC-R45 × 75 × 1650 pcson request
    • Photo: 6009 2RS6009 2RScontact seals on both sides, normal clearance, standard designKLT45 × 75 × 16available to order€1.40
    • Photo: 6009 2RS6009 2RScontact seals on both sides, normal clearance, standard designZ&S45 × 75 × 16available to order€3.12
    • Photo: 6009 2RS6009 2RScontact seals on both sides, normal clearance, standard designWBF45 × 75 × 16available to order€3.44
    • Photo: 6009 2RS NR C36009 2RS NR C3contact seals on both sides, groove and snap ringZ&S45 × 75 × 16available to order€4.05
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø75, seal 45×75

    4 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø75CT SEG 75 W by 100Why it fits: DIN 472 snap ring for a 75 bore: holds the outer ring in the housing
      €19.77available to order
    • Seal 45×75JULU 045-75-10 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing; the bearing has its own seals (D), and the oil seal closes the unit from outside
      €0.50480 pcs
    • Seal 45×75JULU 045-75-8 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing; the bearing has its own seals (D), and the oil seal closes the unit from outside
      €0.57available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    9 machines3 makesby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 1 assembly · 2 pcs per machine

      ours has clearance C3; the machine takes normal (CN); ours has E, EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. KhTZ-17021, KhTZ-17221 KhTZ check the version 1 assembly · 1 pcs per machine

      the machine has S17; ours does not; ours has clearance C3; the machine takes normal (CN); ours has E, EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    3. KhTZ-242K.20 KhTZ check the version 1 assembly · 1 pcs per machine

      ours has clearance C3; the machine takes normal (CN); ours has E, EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    4. KhTZ-243K.20 KhTZ check the version 1 assembly · 1 pcs per machine

      the machine has S17; ours does not; ours has clearance C3; the machine takes normal (CN); ours has E, EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: Tractor KhTZ-243K.20. Operator’s manual

    5. T-150-05-09-25, KhTZ-181 KhTZ check the version 1 assembly · 1 pcs per machine

      ours has clearance C3; the machine takes normal (CN); ours has E, EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 75d 45B 16
    d×D×Bsize 45 × 75 × 16mm

    Deep groove ball bearing 6009-RS C3, design D: contact seal on one side.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet