+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2310K 5 · 50 × 110 × 40

Self-aligning ball · 2310K 5

radial — mediumaxial — low, on both sides
    Drawing of 2310K 5: ⌀50 × ⌀110 × 40 mm⌀110⌀50402310K 5
    Fig. 1: 2310K 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2310K 5

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing NSK 2310K 5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 10 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    40 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 50 × 110 × 40 from other brands

    13 products
    Cross-section drawing to size: Self-aligning ball, 50 × 110 × 40 mm
    You are viewingNSK 2310K 5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 23102310standard designCT50 × 110 × 40147 pcs€8.70
    • Photo: 23102310standard designZ&S50 × 110 × 40available to order€22.89
    • Series illustration (not a photo of this item): 23102310standard designno brand50 × 110 × 40available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 50 × 110 × 40 mm2310 KMM, 1:12 tapered boreCT50 × 110 × 40available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 50 × 110 × 40 mm2310 MMFAG50 × 110 × 40available to orderon request
    • Series illustration (not a photo of this item): 23102310standard designKG50 × 110 × 40available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 50 × 110 × 40 mm2310 55NSK50 × 110 × 40available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 50 × 110 × 40 mm2310 KTNG C3clearance C3, TNG, 1:12 tapered boreNSK50 × 110 × 40available to orderon request
    • Series illustration (not a photo of this item): 23102310standard designSKF50 × 110 × 40available to orderon request
    • Series illustration (not a photo of this item): 2310 2RS2310 2RScontact seals on both sides, standard designKoyo50 × 110 × 40available to orderon request
    02

    Often bought with this

    adapter sleeve H2310, lock nut M50×1.5, lock washer MB10, bore snap ring Ø110

    7 products
    • Adapter sleeve H2310CT H 2310 WITH BLACK KMWhy it fits: H2310 for 2310 K: 1:12 taper, bore 50 for shaft 45 (Koyo, p. 65)
      €2.1350 pcs
    • Adapter sleeve H2310Z&S H 2310Why it fits: H2310 for 2310 K: 1:12 taper, bore 50 for shaft 45 (Koyo, p. 65)
      €3.96available to order
    • Lock nut M50×1.5KM 10Why it fits: KM10 is the nut for sleeve H2310: thread M50×1.5
      €0.901 pcs
    • Lock nut M50×1.5CT KM 10Why it fits: KM10 is the nut for sleeve H2310: thread M50×1.5
      €1.272,000 pcs
    • Lock washer MB10CT MB 10Why it fits: MB10 locks the KM10 nut (ISO 2982-2)
      €0.211,138 pcs
    • Lock washer MB10ZKL MB 10Why it fits: MB10 locks the KM10 nut (ISO 2982-2)
      €0.25available to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 110 × 40mm

    Self-aligning ball bearing 2310 K. Under GOST the same bearing is designated 111610.

    Frequently asked questions

    What is 111610?

    It is the same bearing under GOST 3189-89: 111610 corresponds to the ISO base 2310 K. Size 50 × 110 × 40 mm, a full equivalent of 2310 K.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet