+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2307 K C3 · 35 × 80 × 31

Self-aligning ball · 2307 K C3

radial — mediumaxial — low, on both sides
    Drawing of 2307 K C3: ⌀35 × ⌀80 × 31 mm⌀80⌀35312307 K C3
    Fig. 1: 2307 K C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2307 K C3

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing NSK 2307 K C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 14 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    01

    Equivalents

    the same size 35 × 80 × 31 from other brands

    15 products
    Series illustration (not a photo of this item): 2307 K C3
    You are viewingNSK 2307 K C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 23072307normal clearance, standard designCT35 × 80 × 31116 pcs€4.24
    • Photo: 23072307normal clearance, standard designZ&S35 × 80 × 31available to order€15.32
    • Series illustration (not a photo of this item): 23072307normal clearance, standard designKG35 × 80 × 31available to orderon request
    • Cross-section drawing to size: Deep groove ball, 35 × 80 × 31 mm1607 DSDS: not decodedNICE35 × 80 × 31available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 5normal clearance, 5NSK35 × 80 × 31available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 KTNGnormal clearance, TNG, 1:12 tapered boreNSK35 × 80 × 31available to orderon request
    • Cross-section drawing to size: Deep groove ball, 35 × 80 × 31 mm1607 (2307) PQPQ: not decodedNTE35 × 80 × 31available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 EKTN9normal clearance, different cage, E, 1:12 tapered boreSKF35 × 80 × 31available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 EMnormal clearance, different cage, ESKF35 × 80 × 31available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 ETN9normal clearance, different cage, ESKF35 × 80 × 31available to orderon request
    02

    Often bought with this

    adapter sleeve H2307, lock nut M35×1.5, lock washer MB07, bore snap ring Ø80

    8 products
    • Adapter sleeve H2307CT H 2307Why it fits: H2307 for 2307 K: 1:12 taper, bore 35 for shaft 30 (Koyo, p. 65)
      €1.13968 pcs
    • Adapter sleeve H2307Z&S H 2307Why it fits: H2307 for 2307 K: 1:12 taper, bore 35 for shaft 30 (Koyo, p. 65)
      €2.94available to order
    • Lock nut M35×1.5KM 07Why it fits: KM07 is the nut for sleeve H2307: thread M35×1.5
      €0.82available to order
    • Lock nut M35×1.5Z&S KM 7Why it fits: KM07 is the nut for sleeve H2307: thread M35×1.5
      €0.98available to order
    • Lock washer MB07CT MB 07Why it fits: MB07 locks the KM07 nut (ISO 2982-2)
      €0.106,655 pcs
    • Lock washer MB07NEU MB 7Why it fits: MB07 locks the KM07 nut (ISO 2982-2)
      €0.17available to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 80 × 31mm

    Self-aligning ball bearing 2307 K C3.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet