+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16005CM D 5 · 25 × 47 × 8

Deep groove ball · 16005CM D 5

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 16005CM D 5: ⌀25 × ⌀47 × 8 mm⌀47⌀25816005CM D 5D
    Fig. 1: 16005CM D 5, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16005CM D 5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 16005CM D 5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 8 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    8 mm
    Width BRing width. Source: supplier data
    Seal
    Dcontact seal on one side
    Clearance
    CM
    01

    Equivalents

    the same size 25 × 47 × 8 from other brands

    9 products
    Cross-section drawing to size: Deep groove ball, 25 × 47 × 8 mm
    You are viewingNSK 16005CM D 5

    Same size, different design: the difference is written in the row.

    • Drawing: 16005 2RS16005 2RScontact seals on both sides, normal clearance, standard designCT25 × 47 × 8371 pcs€0.82
    • Drawing: 16005 2RS16005 2RScontact seals on both sides, normal clearance, standard designno brand25 × 47 × 8available to orderon request
    • Cross-section drawing to size: Deep groove ball, 25 × 47 × 8 mmS 16005 2RScontact seals on both sides, S: not decodedZEN25 × 47 × 8available to orderon request
    • Series illustration (not a photo of this item): 1600516005open, no protection, normal clearance, standard designCT25 × 47 × 8130 pcs€0.80
    • Series illustration (not a photo of this item): 1600516005open, no protection, normal clearance, standard designNTE25 × 47 × 8available to orderon request
    • Series illustration (not a photo of this item): 1600516005open, no protection, normal clearance, standard designSKF25 × 47 × 8available to orderon request
    • Drawing: 16005 ZZ16005 ZZmetal shields on both sides, normal clearance, standard designCT25 × 47 × 860 pcs€0.86
    • Type diagram, no dimensions: ball16005 A 2Zmetal shields on both sides, A: not decodedFAG25 × 47 × ?available to orderon request
    02

    Often bought with this

    shaft snap ring Ø25, bore snap ring Ø47, seal 25×47

    5 products
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 25×47JULU 025-47-7 TCWhy it fits: Oil seal 25×47: shaft 25 and housing bore 47, the same as the bearing; the bearing has its own seals (D), and the oil seal closes the unit from outside
      €0.292,309 pcs
    • Seal 25×47JULU 025-47-4 TCWhy it fits: Oil seal 25×47: shaft 25 and housing bore 47, the same as the bearing; the bearing has its own seals (D), and the oil seal closes the unit from outside
      Price to be confirmed20 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 47d 25B 8
    d×D×Bsize 25 × 47 × 8mm

    Deep groove ball bearing 16005-RS, design D: contact seal on one side.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet