+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1311 K · 55 × 120 × 29

Self-aligning ball · 1311 K

radial — mediumaxial — low, on both sides
    Drawing of 1311 K: ⌀55 × ⌀120 × 29 mm⌀120⌀55291311 K
    Fig. 1: 1311 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1311 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing NSK 1311 K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    4 exact, 9 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    29 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 55 × 120 × 29 from other brands

    15 products
    Series illustration (not a photo of this item): 1311 K
    You are viewingNSK 1311 K

    Everything the number specifies matches: series 13, 55 × 120 × 29 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the NSK catalogue.

    • Series illustration (not a photo of this item): 1311 K1311 KThis bearingNSK55 × 120 × 29available to orderon requestyou are here
    • Series illustration (not a photo of this item): 1311 K1311 KCT55 × 120 × 29available to orderon request
    • Series illustration (not a photo of this item): 1311 K1311 KGPZ55 × 120 × 29out of stockon request
    • Series illustration (not a photo of this item): 1311 K1311 KZVL55 × 120 × 29available to orderon request
    02

    Often bought with this

    adapter sleeve H311, lock nut M55×2, lock washer MB11, bore snap ring Ø120

    7 products
    • Adapter sleeve H311CT H 311 WITH BLACK KMWhy it fits: H311 for 1311 K: 1:12 taper, bore 55 for shaft 50 (Koyo, p. 65)
      €2.1312 pcs
    • Adapter sleeve H311CT H 311 SILVERWhy it fits: H311 for 1311 K: 1:12 taper, bore 55 for shaft 50 (Koyo, p. 65)
      €2.65available to order
    • Lock nut M55×2CT KM 11 SILVERWhy it fits: KM11 is the nut for sleeve H311: thread M55×2
      €1.11786 pcs
    • Lock nut M55×2KM 11Why it fits: KM11 is the nut for sleeve H311: thread M55×2
      Price to be confirmedavailable to order
    • Lock washer MB11CT MB 11Why it fits: MB11 locks the KM11 nut (ISO 2982-2)
      €0.29950 pcs
    • Lock washer MB11MB 11Why it fits: MB11 locks the KM11 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 55 × 120 × 29mm

    Self-aligning ball bearing 1311 K.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet