+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1210TNG N 5 · 50 × 90 × 20

Self-aligning ball · 1210TNG N 5

radial — mediumaxial — low, on both sides
    Drawing of 1210TNG N 5: ⌀50 × ⌀90 × 20 mm⌀90⌀50201210TNG N 5
    Fig. 1: 1210TNG N 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1210TNG N 5

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing NSK 1210TNG N 5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 20 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    20 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 50 × 90 × 20 from other brands

    24 products
    Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm
    You are viewingNSK 1210TNG N 5

    Everything the number specifies matches: series 12, 50 × 90 × 20 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NSK catalogue.

    • Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm1210TNG N 5This bearingNSK50 × 90 × 20available to orderon requestyou are here
    • Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm1210TNGNEUWEG50 × 90 × 20available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm1210 5NSK50 × 90 × 20available to orderon request
    02

    Often bought with this

    seal 50×90, shaft snap ring Ø50, bore snap ring Ø90

    5 products
    • Seal 50×90JULU 050-90-10 TCWhy it fits: Oil seal 50×90: shaft 50 and housing bore 90, the same as the bearing
      €0.73280 pcs
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 90 × 20mm

    Self-aligning ball bearing 1210. Under GOST the same bearing is designated 1210.

    Frequently asked questions

    What is 1210?

    It is the same bearing under GOST 3189-89: 1210 corresponds to the ISO base 1210. Size 50 × 90 × 20 mm, a full equivalent of 1210.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet