+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1210KTNGC3 N 5 · 50 × 90 × 20

Self-aligning ball · 1210KTNGC3 N 5

radial — mediumaxial — low, on both sides
    Drawing of 1210KTNGC3 N 5: ⌀50 × ⌀90 × 20 mm⌀90⌀50201210KTNGC3 N 5
    Fig. 1: 1210KTNGC3 N 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1210KTNGC3 N 5

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing NSK 1210KTNGC3 N 5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 21 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    20 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    01

    Equivalents

    the same size 50 × 90 × 20 from other brands

    24 products
    Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm
    You are viewingNSK 1210KTNGC3 N 5

    Everything the number specifies matches: series 12, 50 × 90 × 20 mm, open, no protection, K, clearance C3, special design. The codes in the number are read against the NSK catalogue.

    • Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm1210KTNGC3 N 5This bearingNSK50 × 90 × 20available to orderon requestyou are here
    • Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm1210KTNGC3NEUWEG50 × 90 × 20available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm1210KC3 5NSK50 × 90 × 20available to orderon request
    02

    Often bought with this

    adapter sleeve H210, lock nut M50×1.5, lock washer MB10, bore snap ring Ø90, seal 45×90

    8 products
    • Adapter sleeve H210CT H 210 with black KMWhy it fits: H210 for 1210 K: 1:12 taper, bore 50 for shaft 45 (Koyo, p. 65)
      €1.56available to order
    • Adapter sleeve H210CT H 210Why it fits: H210 for 1210 K: 1:12 taper, bore 50 for shaft 45 (Koyo, p. 65)
      €2.25available to order
    • Lock nut M50×1.5KM 10Why it fits: KM10 is the nut for sleeve H210: thread M50×1.5
      €0.901 pcs
    • Lock nut M50×1.5CT KM 10Why it fits: KM10 is the nut for sleeve H210: thread M50×1.5
      €1.272,000 pcs
    • Lock washer MB10CT MB 10Why it fits: MB10 locks the KM10 nut (ISO 2982-2)
      €0.211,138 pcs
    • Lock washer MB10ZKL MB 10Why it fits: MB10 locks the KM10 nut (ISO 2982-2)
      €0.25available to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Seal 45×90JULU 045-90-10 TCWhy it fits: Oil seal 45×90: sleeve shaft 45, housing bore for the bearing 90; SN/SNL housings have their own seals, so check against the housing
      €0.75150 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 90 × 20mm

    Self-aligning ball bearing 1210 K C3.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet