+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1208TNG N 5 · 40 × 80 × 18

Self-aligning ball · 1208TNG N 5

radial — mediumaxial — low, on both sides
    Drawing of 1208TNG N 5: ⌀40 × ⌀80 × 18 mm⌀80⌀40181208TNG N 5
    Fig. 1: 1208TNG N 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1208TNG N 5

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing NSK 1208TNG N 5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 22 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    25 products
    Cross-section drawing to size: Self-aligning ball, 40 × 80 × 18 mm
    You are viewingNSK 1208TNG N 5

    Everything the number specifies matches: series 12, 40 × 80 × 18 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NSK catalogue.

    • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 18 mm1208TNG N 5This bearingNSK40 × 80 × 18available to orderon requestyou are here
    • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 18 mm1208 5NSK40 × 80 × 18available to orderon request
    02

    Often bought with this

    seal 40×80, shaft snap ring Ø40, bore snap ring Ø80

    6 products
    • Seal 40×80JULU 040-80-7 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.53770 pcs
    • Seal 40×80JULU 040-80-10 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.54463 pcs
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 40 × 80 × 18mm

    Self-aligning ball bearing 1208. Under GOST the same bearing is designated 1208.

    Frequently asked questions

    What is 1208?

    It is the same bearing under GOST 3189-89: 1208 corresponds to the ISO base 1208. Size 40 × 80 × 18 mm, a full equivalent of 1208.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet