+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
9008745172427 6207-2Z · 35 × 72 × 17

Deep groove ball · 9008745172427 6207-2Z · simplified: bore (cylindrical or K), not given in the designation

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 9008745172427 6207-2Z: ⌀35 × ⌀72 × 17 mm⌀72⌀35179008745172427 6207-2Z2Z
    Fig. 1: 9008745172427 6207-2Z, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 9008745172427 6207-2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NKE 9008745172427 6207-2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    8 exact, 68 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    17 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    01

    Equivalents

    the same size 35 × 72 × 17 from other brands

    77 products
    Cross-section drawing to size: Deep groove ball, 35 × 72 × 17 mm
    You are viewingNKE 9008745172427 6207-2Z

    Everything the number specifies matches: series 62, 35 × 72 × 17 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NKE catalogue.

    • Cross-section drawing to size: Deep groove ball, 35 × 72 × 17 mm9008745172427 6207-2ZThis bearingNKE35 × 72 × 17available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6207 ZZ6207 ZZCT35 × 72 × 172,690 pcs€1.37
    • Series illustration (not a photo of this item): 6207 ZZ6207 ZZNTE35 × 72 × 17240 pcs€2.27
    • Series illustration (not a photo of this item): 6207 ZZ6207 ZZKoyo35 × 72 × 1710 pcs€6.46
    • Photo: 6207-2Z6207-2ZSKF35 × 72 × 1760 pcs€8.19
    • Photo: 6207 ZZ6207 ZZZ&S35 × 72 × 17available to order€2.78
    • Photo: 6207 2Z6207 2ZFKL35 × 72 × 17out of stockon request
    • Series illustration (not a photo of this item): 6207 ZZ6207 ZZKG35 × 72 × 17available to orderon request
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø72, seal 35×72

    6 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.502,454 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    10 machines3 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 2 assemblies · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 2 assemblies · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    3. Belarus 1523/​1523V/​1523.3 Belarus same geometry 2 assemblies · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    4. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus same geometry 2 assemblies · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. VBP 2160 (baler) Kuhn same geometry 1 assembly · 4 pcs per machine

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance CN; the machine takes normal (CN)

      manufacturer’s catalogue: kuhn_vbp-2160

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 72d 35B 17
    d×D×Bsize 35 × 72 × 17mm

    Deep groove ball bearing 9008745172427 6207-2Z, design 2Z: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet