+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61804 -2Z-C3 · 20 × 32 × 7

Deep groove ball · 61804 -2Z-C3

radial — mediumaxial — low, on both sides
    Drawing of 61804 -2Z-C3: ⌀20 × ⌀32 × 7 mm61804 -2Z-C32Z
    Fig. 1: 61804 -2Z-C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61804 -2Z-C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NKE 61804 -2Z-C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 16 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    7 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    C3
    01

    Equivalents

    the same size 20 × 32 × 7 from other brands

    18 products
    Series illustration (not a photo of this item): 61804 -2Z-C3
    You are viewingNKE 61804 -2Z-C3

    Everything the number specifies matches: series 618, 20 × 32 × 7 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NKE catalogue.

    • Series illustration (not a photo of this item): 61804 -2Z-C361804 -2Z-C3This bearingNKE20 × 32 × 7available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6804 ZZC36804 ZZC3NSK20 × 32 × 7available to orderon request
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø32, seal 20×32

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    • Seal 20×32JULU 020-32-7 TCWhy it fits: Oil seal 20×32: shaft 20 and housing bore 32, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.211,122 pcs
    • Seal 20×32JULU 020-32-5 TCWhy it fits: Oil seal 20×32: shaft 20 and housing bore 32, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.18available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 20B 7
    d×D×Bsize 20 × 32 × 7mm

    Deep groove ball bearing 61804-ZZ C3, design 2Z: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet