+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NEUWEG
3307B-2RSRTNG · 35 × 80 × 34.9

Angular contact ball · 3307B-2RSRTNG

at an angle — medium, on one side
    Drawing of 3307B-2RSRTNG: ⌀35 × ⌀80 × 34.9 mm⌀80⌀3534.93307B-2RSRTNG2RSR
    Fig. 1: 3307B-2RSRTNG, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3307B-2RSRTNG

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing NEUWEG 3307B-2RSRTNG

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 28 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    34.9 mm
    Width BRing width. Source: supplier data
    Seal
    2RSRcontact seals on both sides
    01

    Equivalents

    the same size 35 × 80 × 34.9 from other brands

    32 products
    Series illustration (not a photo of this item): 3307B-2RSRTNG
    You are viewingNEUWEG 3307B-2RSRTNG

    Everything the number specifies matches: series 33, 35 × 80 × 34.9 mm, contact seals on both sides, special design; any contact angle. The codes in the number are read against the NEUWEG catalogue.

    • Series illustration (not a photo of this item): 3307B-2RSRTNG3307B-2RSRTNGThis bearingNEUWEG35 × 80 × 34.9available to orderon requestyou are here
    • Series illustration (not a photo of this item): 3307 2RS TNG3307 2RS TNGCT35 × 80 × 34.994 pcs€4.79
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø80, seal 35×80

    6 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing; the bearing has its own seals (2RSR), and the oil seal closes the unit from outside
      €0.53250 pcs
    • Seal 35×80035-80-10Why it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing; the bearing has its own seals (2RSR), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 80d 35B 34.9
    d×D×Bsize 35 × 80 × 34.9mm

    Angular contact ball bearing 3307 B-2RS, design 2RSR: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 3307 2RSR C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet