+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €6.59 per piece.
NEU
6211 2RS C3 · 55 × 100 × 21

Deep groove ball · 6211 2RS C3

radial — mediumaxial — low, on both sides
    Drawing of 6211 2RS C3: ⌀55 × ⌀100 × 21 mm6211 2RS C32RS
    Fig. 1: 6211 2RS C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm
    Bearing NEU 6211 2RS C3 — photo 1
    Bearing NEU 6211 2RS C3 — photo 2
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NEU 6211 2RS C3

    €7.97per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    OEM number
    512.01.240, 532.03.310
    Equivalents
    4 exact, 44 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    21 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    C3
    m
    0.61 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 55 × 100 × 21 from other brands

    48 products
    Photo: 6211 2RS C3
    You are viewingNEU 6211 2RS C3
    €7.97baseline for the price comparison

    Everything the number specifies matches: series 62, 55 × 100 × 21 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NEU catalogue.

    • Photo: 6211 2RS C36211 2RS C3This bearingNEU55 × 100 × 21available to order€7.97you are here
    • Series illustration (not a photo of this item): 6211 2RS C36211 2RS C3NTE55 × 100 × 2199 pcs€5.69−€2.28
    • Photo: 6211-2RS1/C36211-2RS1/C3SKF55 × 100 × 21available to order€19.37+€11.40
    • Series illustration (not a photo of this item): 6211 2RSC36211 2RSC3KG55 × 100 × 21available to orderon request

    Under the price: the difference from the price of this bearing (€7.97).
    02

    Often bought with this

    shaft snap ring Ø55, bore snap ring Ø100, seal 55×100

    4 products
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 55×100JULU 055-100-10 TCWhy it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.98630 pcs
    • Seal 55×100SUPTEX 55x100x13Why it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €4.57available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    8 machines3 makesby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 3 assemblies · 3 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 2 assemblies · 4 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 100d 55B 21
    d×D×Bsize 55 × 100 × 21mm
    mweight 0.61kg

    Deep groove ball bearing 6211-2RS C3, design 2RS: contact seals on both sides.

    M: NEU data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet