+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.71 per piece.
NEU
6202 · 15 × 35 × 11

Deep groove ball · 6202

radial — mediumaxial — low, on both sides
    Drawing of 6202: ⌀15 × ⌀35 × 11 mm6202
    Fig. 1: 6202, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6202

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NEU 6202

    €0.86per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    8 exact, 86 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    35 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    11 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.045 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 15 × 35 × 11 from other brands

    98 products
    Photo: 6202
    You are viewingNEU 6202
    €0.86baseline for the price comparison

    Everything the number specifies matches: series 62, 15 × 35 × 11 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NEU catalogue.

    • Photo: 62026202This bearingNEU15 × 35 × 11available to order€0.86you are here
    • Series illustration (not a photo of this item): 62026202CT15 × 35 × 11750 pcs€0.36−€0.50
    • Series illustration (not a photo of this item): 62026202NTE15 × 35 × 1160 pcs€0.47−€0.39
    • Photo: 62026202GPZ15 × 35 × 11available to order€1.05+€0.19
    • Photo: 62026202SKF15 × 35 × 11available to order€2.27+€1.41
    • Series illustration (not a photo of this item): 62026202no brand15 × 35 × 11available to orderon request
    • Series illustration (not a photo of this item): 62026202KG15 × 35 × 11available to orderon request
    • Series illustration (not a photo of this item): 62026202NACHI15 × 35 × 11available to orderon request

    Under the price: the difference from the price of this bearing (€0.86).
    02

    Often bought with this

    seal 15×35, shaft snap ring Ø15, bore snap ring Ø35

    5 products
    • Seal 15×35JULU 015-35-7 TCWhy it fits: Oil seal 15×35: shaft 15 and housing bore 35, the same as the bearing
      €0.211,290 pcs
    • Seal 15×35JULU 015-35-10 TCWhy it fits: Oil seal 15×35: shaft 15 and housing bore 35, the same as the bearing
      €0.24available to order
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø35CT SEG 35 W by 1000Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      €40.62available to order
    • Bore snap ring Ø35SEG 35 W (100 pcs)Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 35d 15B 11
    d×D×Bsize 15 × 35 × 11mm
    mweight 0.045kg

    Deep groove ball bearing 6202. Under GOST the same bearing is designated 202.

    M: NEU data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 202?

    It is the same bearing under GOST 3189-89: 202 corresponds to the ISO base 6202. Size 15 × 35 × 11 mm, a full equivalent of 6202.

    Will 6202 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet