+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.39 per piece.
NEU
6008 · 40 × 68 × 15

Deep groove ball · 6008

radial — mediumaxial — low, on both sides
    Drawing of 6008: ⌀40 × ⌀68 × 15 mm6008
    Fig. 1: 6008, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6008

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NEU 6008

    €2.89per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 45 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    68 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    15 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.19 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 68 × 15 from other brands

    52 products
    Photo: 6008
    You are viewingNEU 6008
    €2.89baseline for the price comparison

    Everything the number specifies matches: series 60, 40 × 68 × 15 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NEU catalogue.

    • Photo: 60086008This bearingNEU40 × 68 × 15available to order€2.89you are here
    • Series illustration (not a photo of this item): 60086008CT40 × 68 × 15300 pcs€1.37−€1.52
    • Photo: 60086008SKF40 × 68 × 15available to order€6.49+€3.60
    • Series illustration (not a photo of this item): 60086008KG40 × 68 × 15available to orderon request
    • Series illustration (not a photo of this item): 60086008NTE40 × 68 × 15available to orderon request

    Under the price: the difference from the price of this bearing (€2.89).
    02

    Often bought with this

    seal 40×68, shaft snap ring Ø40, bore snap ring Ø68

    5 products
    • Seal 40×68JULU 040-68-10 TCWhy it fits: Oil seal 40×68: shaft 40 and housing bore 68, the same as the bearing
      €0.443,418 pcs
    • Seal 40×68JULU 040-68-7 TCWhy it fits: Oil seal 40×68: shaft 40 and housing bore 68, the same as the bearing
      €0.44210 pcs
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø68CT SEG 68 W by 100Why it fits: DIN 472 snap ring for a 68 bore: holds the outer ring in the housing
      €16.07available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 68d 40B 15
    d×D×Bsize 40 × 68 × 15mm
    mweight 0.19kg

    Deep groove ball bearing 6008. Under GOST the same bearing is designated 108.

    M: NEU data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 108?

    It is the same bearing under GOST 3189-89: 108 corresponds to the ISO base 6008. Size 40 × 68 × 15 mm, a full equivalent of 6008.

    Will 6008 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet