+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NEU
2210 K · 50 × 90 × 23

Self-aligning ball · 2210 K

radial — mediumaxial — low, on both sides
    Drawing of 2210 K: ⌀50 × ⌀90 × 23 mm⌀90⌀50232210 K
    Fig. 1: 2210 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2210 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing NEU 2210 K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 12 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    23 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.27 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 50 × 90 × 23 from other brands

    13 products
    Cross-section drawing to size: Self-aligning ball, 50 × 90 × 23 mm
    You are viewingNEU 2210 K

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22102210standard designCT50 × 90 × 2399 pcs€4.46
    • Photo: 22102210standard designZWZ50 × 90 × 23available to order€8.09
    • Photo: 2210 TN2210 TNTNZ&S50 × 90 × 23available to order€10.31
    • Series illustration (not a photo of this item): 22102210standard designno brand50 × 90 × 23available to orderon request
    • Series illustration (not a photo of this item): 22102210standard designKG50 × 90 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 50 × 90 × 23 mm2210 EKTN9different cage, E, 1:12 tapered boreSKF50 × 90 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 50 × 90 × 23 mm2210 EKTN9/C3clearance C3, different cage, E, 1:12 tapered boreSKF50 × 90 × 23available to orderon request
    • Series illustration (not a photo of this item): 2210 2RS2210 2RScontact seals on both sides, standard designCT50 × 90 × 23available to order€4.82
    • Photo: 2210 2RS2210 2RScontact seals on both sides, standard designZ&S50 × 90 × 23available to order€11.20
    • Series illustration (not a photo of this item): 2210 2RS2210 2RScontact seals on both sides, standard designno brand50 × 90 × 23available to orderon request
    02

    Often bought with this

    adapter sleeve H310, lock nut M50×1.5, lock washer MB10, bore snap ring Ø90, seal 45×90

    8 products
    • Adapter sleeve H310CT H 310Why it fits: H310 for 2210 K: 1:12 taper, bore 50 for shaft 45 (Koyo, p. 65)
      €2.0366 pcs
    • Adapter sleeve H310NEU H 310Why it fits: H310 for 2210 K: 1:12 taper, bore 50 for shaft 45 (Koyo, p. 65)
      €4.32available to order
    • Lock nut M50×1.5KM 10Why it fits: KM10 is the nut for sleeve H310: thread M50×1.5
      €0.901 pcs
    • Lock nut M50×1.5CT KM 10Why it fits: KM10 is the nut for sleeve H310: thread M50×1.5
      €1.272,000 pcs
    • Lock washer MB10CT MB 10Why it fits: MB10 locks the KM10 nut (ISO 2982-2)
      €0.211,138 pcs
    • Lock washer MB10ZKL MB 10Why it fits: MB10 locks the KM10 nut (ISO 2982-2)
      €0.25available to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Seal 45×90JULU 045-90-10 TCWhy it fits: Oil seal 45×90: sleeve shaft 45, housing bore for the bearing 90; SN/SNL housings have their own seals, so check against the housing
      €0.75150 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 90 × 23mm
    mweight 0.27kg

    Self-aligning ball bearing 2210 K.

    M: NEU data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet