+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NAF
SS 3206 2RS · 30 × 62 × 23.8

Angular contact ball · SS 3206 2RS

at an angle — medium, on both sides
    Drawing of SS 3206 2RS: ⌀30 × ⌀62 × 23.8 mm⌀62⌀3023.8SS 3206 2RS2RS
    Fig. 1: SS 3206 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of SS 3206 2RS

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing NAF SS 3206 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 34 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23.8 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    01

    Equivalents

    the same size 30 × 62 × 23.8 from other brands

    38 products
    Series illustration (not a photo of this item): SS 3206 2RS
    You are viewingNAF SS 3206 2RS

    Everything the number specifies matches: series 32, 30 × 62 × 23.8 mm, contact seals on both sides, stainless steel; any contact angle. The codes in the number are read against the NAF catalogue.

    • Series illustration (not a photo of this item): SS 3206 2RSSS 3206 2RSThis bearingNAF30 × 62 × 23.8available to orderon requestyou are here
    • Series illustration (not a photo of this item): SS 3206 2RSSS 3206 2RSCT30 × 62 × 23.83 pcs€10.84
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø62, seal 30×62

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.401,764 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 62d 30B 23.8
    d×D×Bsize 30 × 62 × 23.8mm

    Angular contact ball bearing 3206-2RS SS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet