+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
7204 B · 20 × 47 × 14

Angular contact ball · 7204 B

at an angle — medium, on one side
    Drawing of 7204 B: ⌀20 × ⌀47 × 14 mm⌀47⌀20147204 B
    Fig. 1: 7204 B, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 7204 B

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing NACHI 7204 B

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    6 exact, 10 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    14 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    01

    Equivalents

    the same size 20 × 47 × 14 from other brands

    17 products
    Series illustration (not a photo of this item): 7204 B
    You are viewingNACHI 7204 B

    Everything the number specifies matches: series 72, 20 × 47 × 14 mm, open, no protection, B, special design. The codes in the number are read against the NACHI catalogue.

    • Series illustration (not a photo of this item): 7204 B7204 BThis bearingNACHI20 × 47 × 14available to orderon requestyou are here
    • Series illustration (not a photo of this item): 7204 B7204 BCT20 × 47 × 14available to order€1.38
    • Photo: 7204 B7204 BAWB20 × 47 × 14available to order€3.12
    • Photo: 7204 B7204 BKYK20 × 47 × 14available to order€6.16
    • Series illustration (not a photo of this item): 7204 B7204 Bno brand20 × 47 × 14available to orderon request
    • Series illustration (not a photo of this item): 7204 B7204 BKG20 × 47 × 14available to orderon request
    02

    Often bought with this

    seal 20×47, shaft snap ring Ø20, bore snap ring Ø47

    5 products
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing
      €0.293,920 pcs
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 2 pcs per machine

      ours has B; the type of our item by number does not match its section: please check; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by GOST (66204) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 47d 20B 14
    d×D×Bsize 20 × 47 × 14mm

    Angular contact ball bearing 7204 B. Under GOST the same bearing is designated 66204.

    Frequently asked questions

    What is 66204?

    It is the same bearing under GOST 3189-89: 66204 corresponds to the ISO base 7204 B. Size 20 × 47 × 14 mm, a full equivalent of 7204 B.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet