+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6010 2NSE · 50 × 80 × 16

Deep groove ball · 6010 2NSE

radial — mediumaxial — low, on both sides
    Drawing of 6010 2NSE: ⌀50 × ⌀80 × 16 mm6010 2NSE2NSE
    Fig. 1: 6010 2NSE, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6010 2NSE

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NACHI 6010 2NSE

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    11 exact, 22 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    2NSEcontact seals on both sides
    Clearance
    normal clearance
    C
    21.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    16.6 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.264 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 50 × 80 × 16 from other brands

    35 products
    Series illustration (not a photo of this item): 6010 2NSE
    You are viewingNACHI 6010 2NSE

    Everything the number specifies matches: series 60, 50 × 80 × 16 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NACHI catalogue.

    • Series illustration (not a photo of this item): 6010 2NSE6010 2NSEThis bearingNACHI50 × 80 × 16available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6010 2RS6010 2RSCT50 × 80 × 161,754 pcs€1.98
    • Series illustration (not a photo of this item): 6010 2RS6010 2RSNTE50 × 80 × 1659 pcs€2.58
    • Series illustration (not a photo of this item): 6010 2RS6010 2RSKoyo50 × 80 × 1623 pcs€10.88
    • Photo: 6010 2RS6010 2RSZ&S50 × 80 × 16available to order€4.21
    • Photo: 6010-2RS16010-2RS1SKF50 × 80 × 16available to order€12.71
    • Photo: 6010 2RS6010 2RSTIMKEN50 × 80 × 16available to order€16.76
    • Photo: 6010 2RS6010 2RSNEU50 × 80 × 16available to order€20.32
    • Series illustration (not a photo of this item): 6010 2RS6010 2RSno brand50 × 80 × 16available to orderon request
    • Series illustration (not a photo of this item): 6010 2RS6010 2RSKG50 × 80 × 16available to orderon request
    02

    Often bought with this

    shaft snap ring Ø50, bore snap ring Ø80, seal 50×80

    6 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 50×80JULU 050-80-10 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing; the bearing has its own seals (2NSE), and the oil seal closes the unit from outside
      €0.541,000 pcs
    • Seal 50×80JULU 050-80-8 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing; the bearing has its own seals (2NSE), and the oil seal closes the unit from outside
      €0.54700 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    3 machines2 makesby parts catalogues

    1. Belarus-152 Belarus same geometry 3 assemblies · 5 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    2. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by GOST (180110) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 50B 16
    d×D×Bsize 50 × 80 × 16mm
    Cdynamic 21.8kN
    C0static 16.6kN
    mweight 0.264kg

    Deep groove ball bearing 6010-2RS, design 2NSE: contact seals on both sides. Under GOST the same bearing is designated 180110.

    C, C₀, m: NACHI data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180110?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0110 corresponds to the ISO base 6010. Size 50 × 80 × 16 mm, a full equivalent of 6010-2RS.

    Will 6010 2NSE C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet