+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6008 ZZE C3 · 40 × 68 × 15

Deep groove ball · 6008 ZZE C3

radial — mediumaxial — low, on both sides
    Drawing of 6008 ZZE C3: ⌀40 × ⌀68 × 15 mm6008 ZZE C3ZZE
    Fig. 1: 6008 ZZE C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6008 ZZE C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NACHI 6008 ZZE C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 48 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    68 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    15 mm
    Width BRing width. Source: supplier data
    Seal
    ZZEmetal shields on both sides
    Clearance
    C3
    C
    16.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    11.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.194 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 68 × 15 from other brands

    51 products
    Series illustration (not a photo of this item): 6008 ZZE C3
    You are viewingNACHI 6008 ZZE C3

    Everything the number specifies matches: series 60, 40 × 68 × 15 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NACHI catalogue.

    • Series illustration (not a photo of this item): 6008 ZZE C36008 ZZE C3This bearingNACHI40 × 68 × 15available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6008 ZZC36008 ZZC3KG40 × 68 × 15available to orderon request
    • Series illustration (not a photo of this item): 6008-2Z/C36008-2Z/C3SKF40 × 68 × 15available to orderon request
    02

    Often bought with this

    shaft snap ring Ø40, bore snap ring Ø68, seal 40×68

    5 products
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø68CT SEG 68 W by 100Why it fits: DIN 472 snap ring for a 68 bore: holds the outer ring in the housing
      €16.07available to order
    • Seal 40×68JULU 040-68-10 TCWhy it fits: Oil seal 40×68: shaft 40 and housing bore 68, the same as the bearing; the bearing has its own seals (ZZE), and the oil seal closes the unit from outside
      €0.443,418 pcs
    • Seal 40×68JULU 040-68-7 TCWhy it fits: Oil seal 40×68: shaft 40 and housing bore 68, the same as the bearing; the bearing has its own seals (ZZE), and the oil seal closes the unit from outside
      €0.44210 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 68d 40B 15
    d×D×Bsize 40 × 68 × 15mm
    Cdynamic 16.8kN
    C0static 11.5kN
    mweight 0.194kg

    Deep groove ball bearing 6008-ZZ C3, design ZZE: metal shields on both sides.

    C, C₀, m: NACHI data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet