+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6000-2NSE9 · 10 × 26

Deep groove ball · 6000-2NSE9 · simplified: bore (cylindrical or K), not given in the designation; width not specified

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6000-2NSE9: ⌀10 × ⌀26 mm⌀26⌀106000-2NSE92NSE
    Fig. 1: 6000-2NSE9, simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6000-2NSE9

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NACHI 6000-2NSE9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 29 approximate
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    26 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    Seal
    2NSEcontact seals on both sides
    01

    Equivalents

    the same size 10 × 26 from other brands

    46 products
    Type diagram, no dimensions: ball
    You are viewingNACHI 6000-2NSE9

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6000 ZZ6000 ZZmetal shields on both sidesCT10 × 26 × 846,870 pcs€0.22
    • Series illustration (not a photo of this item): 6000 ZZ6000 ZZmetal shields on both sidesNTE10 × 26 × 8380 pcs€0.33
    • Series illustration (not a photo of this item): 6000-2Z/C36000-2Z/C3metal shields on both sidesSKF10 × 26 × 8256 pcs€2.07
    • Series illustration (not a photo of this item): 6000 ZZ6000 ZZmetal shields on both sidesKoyo10 × 26 × 810 pcs€2.11
    • Series illustration (not a photo of this item): 6000 ZZ C36000 ZZ C3metal shields on both sidesKoyo10 × 26 × 815 pcs€2.11
    • Photo: 6000 ZZ6000 ZZmetal shields on both sidesZ&S10 × 26 × 8available to order€0.57
    • Photo: 6000-2Z6000-2Zmetal shields on both sidesSKF10 × 26 × 8available to order€2.32
    • Series illustration (not a photo of this item): 6000 ZZ6000 ZZmetal shields on both sidesno brand10 × 26 × 8available to orderon request
    • Series illustration (not a photo of this item): 6000 ZZ C36000 ZZ C3metal shields on both sidesCT10 × 26 × 8available to orderon request
    • Series illustration (not a photo of this item): 6000 ZZ6000 ZZmetal shields on both sidesFKL10 × 26 × 8out of stockon request
    02

    Often bought with this

    shaft snap ring Ø10, bore snap ring Ø26, seal 10×26

    3 products
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø26CT SEG 26 W by 1000Why it fits: DIN 472 snap ring for a 26 bore: holds the outer ring in the housing
      €22.64available to order
    • Seal 10×26JULU 010-26-7 TCWhy it fits: Oil seal 10×26: shaft 10 and housing bore 26, the same as the bearing; the bearing has its own seals (2NSE), and the oil seal closes the unit from outside
      €0.181,400 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 10 × 26mm

    Deep groove ball bearing 6000-2NSE9, design 2NSE: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet