+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
MTM
6406 2RS · 30 × 90 × 23

Deep groove ball · 6406 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6406 2RS: ⌀30 × ⌀90 × 23 mm6406 2RS2RS
    Fig. 1: 6406 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6406 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing MTM 6406 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    5 exact, 14 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 30 × 90 × 23 from other brands

    19 products
    Drawing: 6406 2RS
    You are viewingMTM 6406 2RS

    Everything the number specifies matches: series 64, 30 × 90 × 23 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the MTM catalogue.

    • Drawing: 6406 2RS6406 2RSThis bearingMTM30 × 90 × 23available to orderon requestyou are here
    • Drawing: 6406 2RS6406 2RSCT30 × 90 × 2364 pcs€3.47
    • Drawing: 6406 2RS6406 2RSno brand30 × 90 × 23available to orderon request
    • Drawing: 6406 2RS6406 2RSIBB30 × 90 × 23available to orderon request
    • Drawing: 6406 2RS6406 2RSSLF30 × 90 × 23available to orderon request
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø90

    4 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines2 makesby parts catalogues

    1. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus same geometry 1 assembly · 1 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; not decoded: mark “K” in the machine catalogue

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by GOST (180406) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 90d 30B 23
    d×D×Bsize 30 × 90 × 23mm

    Deep groove ball bearing 6406-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180406.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180406?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0406 corresponds to the ISO base 6406. Size 30 × 90 × 23 mm, a full equivalent of 6406-2RS.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet