+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €17.82 per piece.
M.G.M.
1310 · 50 × 110 × 27

Self-aligning ball · 1310

radial — mediumaxial — low, on both sides
    Drawing of 1310: ⌀50 × ⌀110 × 27 mm⌀110⌀50271310
    Fig. 1: 1310, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1310

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing MGM 1310

    €21.56per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    5 exact, 8 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    27 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.96 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 50 × 110 × 27 from other brands

    15 products
    Photo: 1310
    You are viewingM.G.M. 1310
    €21.56baseline for the price comparison

    Everything the number specifies matches: series 13, 50 × 110 × 27 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the M.G.M. catalogue.

    • Photo: 13101310This bearingM.G.M.50 × 110 × 27available to order€21.56you are here
    • Series illustration (not a photo of this item): 13101310CT50 × 110 × 27239 pcs€6.78−€14.78
    • Photo: 13101310RXB50 × 110 × 27available to order€13.46−€8.10
    • Series illustration (not a photo of this item): 13101310KG50 × 110 × 27available to orderon request
    • Series illustration (not a photo of this item): 13101310NSK50 × 110 × 27available to orderon request

    Under the price: the difference from the price of this bearing (€21.56).
    02

    Often bought with this

    seal 50×110, shaft snap ring Ø50, bore snap ring Ø110

    4 products
    • Seal 50×110JULU 050-110-10 TCWhy it fits: Oil seal 50×110: shaft 50 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 110 × 27mm
    mweight 0.96kg

    Self-aligning ball bearing 1310. Under GOST the same bearing is designated 1310.

    M: M.G.M. data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1310?

    It is the same bearing under GOST 3189-89: 1310 corresponds to the ISO base 1310. Size 50 × 110 × 27 mm, a full equivalent of 1310.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet