+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
LDI
1224 · 120 × 215 × 42

Self-aligning ball · 1224

radial — mediumaxial — low, on both sides
    Drawing of 1224: ⌀120 × ⌀215 × 42 mm⌀215⌀120421224
    Fig. 1: 1224, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1224

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing LDI 1224

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 2 approximate
    d
    120 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    215 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    42 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 120 × 215 × 42 from other brands

    4 products
    Series illustration (not a photo of this item): 1224
    You are viewingLDI 1224

    Everything the number specifies matches: series 12, 120 × 215 × 42 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the LDI catalogue.

    • Series illustration (not a photo of this item): 12241224This bearingLDI120 × 215 × 42available to orderon requestyou are here
    • Series illustration (not a photo of this item): 12241224ZEN120 × 215 × 42available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 120 × 215 × 42mm

    Self-aligning ball bearing 1224. Under GOST the same bearing is designated 1224.

    Frequently asked questions

    What is 1224?

    It is the same bearing under GOST 3189-89: 1224 corresponds to the ISO base 1224. Size 120 × 215 × 42 mm, a full equivalent of 1224.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet