+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €7.25 per piece.
62/28 2RS · 28 × 58 × 16

Deep groove ball · 62/28 2RS

radial — mediumaxial — low, on both sides
    Drawing of 62/28 2RS: ⌀28 × ⌀58 × 16 mm62/28 2RS2RS
    Fig. 1: 62/28 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 62/28 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Koyo 62/28 2RS

    €8.77per piece incl. VAT
    In stock: 15 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 2 approximate
    d
    28 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    58 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    22.4 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    9.75 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.173 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 28 × 58 × 16 from other brands

    5 products
    Series illustration (not a photo of this item): 62/28 2RS
    You are viewingKoyo 62/28 2RS
    €8.77baseline for the price comparison

    Everything the number specifies matches: series 62/, 28 × 58 × 16 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Koyo catalogue.

    • Series illustration (not a photo of this item): 62/28 2RS62/28 2RSThis bearingKoyo28 × 58 × 1615 pcs€8.77you are here
    • Photo: 62/28 2RS62/28 2RSWBF28 × 58 × 16out of stockon request

    Under the price: the difference from the price of this bearing (€8.77).
    02

    Often bought with this

    shaft snap ring Ø28, bore snap ring Ø58

    2 products
    • Shaft snap ring Ø28CT SEG 28 Z by 1000Why it fits: DIN 471 snap ring for a 28 shaft: holds the inner ring on the shaft
      €32.92available to order
    • Bore snap ring Ø58CT SEG 58 W by 1000Why it fits: DIN 472 snap ring for a 58 bore: holds the outer ring in the housing
      €107.05out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 58d 28B 16
    d×D×Bsize 28 × 58 × 16mm
    Cdynamic 22.4kN
    C0static 9.75kN
    mweight 0.173kg

    Deep groove ball bearing 62/28-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: Koyo data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 62/28 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet