+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €41.96 per piece.
KONLON
6028 2RS · 140 × 210 × 33

Deep groove ball · 6028 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6028 2RS: ⌀140 × ⌀210 × 33 mm6028 2RS2RS
    Fig. 1: 6028 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6028 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing KONLON 6028 2RS

    €50.77per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 10 approximate
    d
    140 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    210 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    33 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    m
    3.45 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 140 × 210 × 33 from other brands

    11 products
    Photo: 6028 2RS
    You are viewingKONLON 6028 2RS
    €50.77baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 60286028open, no protectionCT140 × 210 × 3353 pcs€18.37−€32.40
    • Series illustration (not a photo of this item): 60286028open, no protectionDYZV140 × 210 × 33available to orderon request
    • Series illustration (not a photo of this item): 60286028open, no protectionFAG140 × 210 × 33available to orderon request
    • Drawing: 6028 M-C36028 M-C3open, no protection, clearance C3, MFAG140 × 210 × 33available to orderon request
    • Series illustration (not a photo of this item): 60286028open, no protectionKG140 × 210 × 33available to orderon request
    • Drawing: 6028CM 56028CM 5open, no protection, clearance CM, 5NSK140 × 210 × 33available to orderon request
    • Series illustration (not a photo of this item): 60286028open, no protectionSKF140 × 210 × 33available to orderon request
    • Series illustration (not a photo of this item): 6028 ZZ6028 ZZmetal shields on both sidesCT140 × 210 × 3396 pcs€14.81−€35.96
    • Series illustration (not a photo of this item): 6028 2Z C36028 2Z C3metal shields on both sides, clearance C3FAG140 × 210 × 33available to orderon request
    • Series illustration (not a photo of this item): 6028-2RS1/C36028-2RS1/C3clearance C3SKF140 × 210 × 33available to orderon request

    Under the price: the difference from the price of this bearing (€50.77).
    02

    Details

    what this bearing is, questions

    About the bearing

    D 210d 140B 33
    d×D×Bsize 140 × 210 × 33mm
    mweight 3.45kg

    Deep groove ball bearing 6028-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180128.

    M: KONLON data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180128?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0128 corresponds to the ISO base 6028. Size 140 × 210 × 33 mm, a full equivalent of 6028-2RS.

    Will 6028 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet